Mini Sewing Machine 4*1 – Practical Electric Mini Machine – White

Description of Practical Electric Mini Machine:

The method of work:

• Use the hand wheel to lift the needle into position, lift the pressure plate against the fabric with the back handle and place
• It on the fabric.
• Lower the pressure plate, turn the hand wheel a few clockwise turns, turn and start sewing.
• There is a speed adjusting cutter at the back face of the machine, with “high” and “low” gears, when pressed, the work switches to the fast gear, press again to raise the cutter and switch to work with the slow gear
• Pull the piece by hand for a straight motion of rotation. Make it move naturally and don’t pull too hard so it doesn’t cut the thread.
• Turn off the motor after use and rotate the hand wheel to raise the needle to the highest position.
• Place the thread 15-25 mm from the needle and cut it off.
• Attention: Do not pull the clothes or the thread too hard so as not to hurt the Mmachine or Needle.)
• Lift the pressure plate using the pressure plate handle. Softly pull the fabric, rotate the stitched fabric and pull the thread, then knot according to Figure 2 in the User’s Manual.